enLanguage

Photovoltaic Cover Fabrication Methods and Application Technologies

Jul 07, 2025

Leave a message

As a crucial component of photovoltaic modules, photovoltaic covers primarily protect the cells from environmental damage while ensuring light transmittance and mechanical strength. Their fabrication process directly impacts the photovoltaic module's photoelectric conversion efficiency and service life, making the use of scientific and rational fabrication methods crucial.

 

Currently, photovoltaic covers are primarily made of tempered glass or transparent composite materials. Tempered glass is the mainstream choice due to its excellent weather resistance, high light transmittance, and impact resistance. During fabrication, low-iron, ultra-clear glass is used to reduce light absorption and increase light transmittance. The raw glass undergoes cutting, edge grinding, and tempering processes. The tempering process, involving high-temperature heating and rapid cooling, strengthens the glass, enabling it to withstand external forces such as wind pressure and hail. To further enhance the performance of photovoltaic covers, an anti-reflective coating can be applied to the glass surface to reduce light reflection loss and increase light transmission efficiency.

Composite photovoltaic covers are typically made of highly transparent plastics such as polycarbonate (PC) or polymethyl methacrylate (PMMA) through injection molding or extrusion. This type of material offers advantages such as light weight and strong UV resistance, making it suitable for lightweight photovoltaic modules. However, its weather resistance is slightly inferior to tempered glass, and anti-aging agents are required to extend its service life.

During the encapsulation process, the photovoltaic cover is laminated with the EVA (ethylene-vinyl acetate copolymer) film, solar cells, and backsheet to form a complete photovoltaic module. During the lamination process, temperature, pressure, and time parameters must be precisely controlled to ensure a secure bond between the layers while avoiding air bubbles and delamination.

In the future, as photovoltaic technology advances, the material selection and manufacturing process of photovoltaic covers will be further optimized to improve photovoltaic efficiency and reduce costs, promoting the sustainable development of the photovoltaic industry.